Initial Calibration; Accessing The Internal On-Screen Menus; Main Screen - Extron electronics TouchLink TLP 710MV User Manual

Initial Calibration

This section describes:
•
•
•
•
•
•
•

Accessing the Internal On-screen Menus

When the TouchLink panel first has power applied, the unit boots up and displays the
opening screen. To access the on-screen menus, press the Menu button (see page 5 for the
TLP 710MV
The menus open at the Main screen. There are five different screens (Main, Volume,
Time, Network, and Video) that can be selected by pressing the appropriate button at
the left edge of the screen.
There is also an Exit button at the bottom left corner of the screen. This button applies
and saves any changes and closes the menu screens.

Main Screen

Figure 13.
Values can be changed by pressing the buttons to highlight them. Press the Down or Up
buttons to adjust the values or toggle the Auto Backlight or Wake on Motion buttons
between Off and On. When the function has a value (other than on or off), that value is
shown above the buttons.
Accessing the Internal On-screen Menus
Main Screen
Volume Screen
Time Screen
Network Screen
Video Screen
Touch Calibration Screen
or page 10 for the
Main
Sleep timer: 300 Sec
Volume
Down
Time
Backlight: 073%
Network
Down
Video
Exit
Main Screen
TLP 710TV).
Auto Backlight
Up On
Up
Wake on Motion
On
TLP 710MV and TLP 710TV • Initial Calibration
PoE
Active
14