Table of Contents
Advertisement
Initial Calibration
This section describes:
•
•
•
•
•
•
•
Accessing the Internal On-screen Menus
When the TouchLink panel first has power applied, the unit boots up and displays the
opening screen. To access the on-screen menus, press the
the
The menus open at the Main screen. There are five different screens (Main, Volume,
Time, Network, and Video) that can be selected by pressing the appropriate button at
the left edge of the screen.
There is also an
and saves any changes and closes the menu screens.
Main Screen
Figure 13.
Values can be changed by pressing the buttons to highlight them. Press the
buttons to adjust the values or toggle the Auto Backlight or Wake on Motion buttons
between
shown above the buttons.
Accessing the Internal On-screen Menus
Main Screen
Volume Screen
Time Screen
Network Screen
Video Screen
Touch Calibration Screen
TLP 710MV
or page 10 for the TLP 710TV).
button at the bottom left corner of the screen. This button applies
Exit
Main
Sleep timer: 300 Sec
Volume
Down
Time
Backlight: 073%
Network
Down
Video
Exit
Main Screen
and
. When the function has a value (other than on or off), that value is
Off
On
Auto Backlight
Up
On
Up
Wake on Motion
On
TLP 710MV and TLP 710TV • Initial Calibration
button (see page 5 for
Menu
PoE
Active
or
Down
Up
14
Advertisement
Table of Contents
