ONVIF Device Manager
In order to use the camera discovery feature in Camera Settings effectively, it is useful to define
the camera name and location. This information can be used to differentiate between multiple
cameras of the same make and model.
ONVIF Device Manager can be used to change the camera name and location.
Downloading ONVIF Device Manager
The ONVIF Device Manager can be found at
•
http://synesis.ru/en/surveillance/downloads
The latest version can be downloaded from
•
http://sourceforge.net/projects/onvifdm/
System Requirements:
•
OS: Windows XP SP3/Windows Vista/Windows 7
•
Prerequisite: Microsoft .NET 4.0. Available at
-
http://www.microsoft.com/net/
Installing Microsoft .NET4.0
It is recommended to install Microsoft .NET 4 before running the ONVIF Device Manager Setup.
This procedure is optional as some Windows systems may already have it installed.
1. Download Microsoft .NET 4 from http://www.microsoft.com/net/
2. Run the ONVIF Device Manager Setup.
The setup will verify if .NET 4 is installed. If it is .NET is installed, see "Installing the ONVIF
Device Manager" on page 83.. If it is not, you will be asked to download it.
3. Click Download.
ONVIF DEVICE MANAGER
81