UC360 Administration Guide
You have the following choices:
•
Logout
•
System Settings
•
Sound (see "Sound" on page 51)
•
Display (see "Display" on page 52)
•
Applications
•
Storage
•
Language & Keyboard (see "Language & Keyboard Settings" on page 53)
•
Date and Time (see "Date & Time" on page 54)
•
About phone
If you forget the password, you can hold down the Back key for 5 seconds. This will launch a
Mitel customized Factory Data Reset window which requires confirmation before resetting the
phone to factory data defaults. See "Factory Reset" on page 50.
You may cancel out of the Factory Data Reset at this screen in the standard way by using the
Back key. Reset to factory defaults allows the administrator access to the UC360 using the
default password. Once reset, the software load reverts to the factory load, and the UC360's
site-specific settings will need to be reconfigured.
Note: Do not change the Date and Time while in a call. This may cause the UC360 to
reboot.
10