Mitel UC360 Administration Manual page 138

UC360 Administration Guide
Backup Import/Export
HTTP Server Address
Upgrade System SW
Software HTTP Server
Auto Upgrade
User Confirmation
Upgrade Time
Debug Settings
Debugging (Debug Logging)
Debugging Level
Kernel Messages
Debug Logs Size
Automatic Ethernet Trace (Congestion)
Manual Ethernet Trace (User Button Enable)
Development Ethernet Debugging
eXoSIP Log Level
Legacy Interop Mode
Always mirror primary to HDMI
122
HTTP Import <http_cfg ServerUrl="[HTTP SERVER URL – can include port & path]"
Configuration
TrustAllHosts="[0:disable|1:enable]"></http_cfg>
<http_download>[HTTP SERVER IP PORTION]</http_download>
Address
<http_port>[HTTP SERVER PORT NUMBER]</httpport>
<http_upgrade>[0 disabled|1:upgrade on|2:upgrade auto]></http_upgrade>
Auto Polling <firmware_abs_enable>[0:disabled|1:enabled]</firmware_abs_enable>
<http_upgrade_user_confirm>[0 disabled|1:upgrade on]></http_upgrade>
<firmware_abs_timer_hr>[24 HOUR FORMAT HOUR]</firmware_abs_timer_hr>
<firmware_abs_timer_min>[MINUTE]</firmware_abs_timer_min>
<debug LogDebugging="[0:disable|1:enable]"></debug>
<debug LogLevel="[Verbose|Debug|Information|Warning|Error]"></debug>
<debug LogKernelMessages="[0:disable|1:enable]"></debug>
<debug LogSize="[SIZE IN MB]"></debug>
<debug AutoEthernetTrace="[0:disable|1:enable]"></debug>
<debug UserEthernetTrace="[0:disable|1:enable]"></debug>
<debug EthernetDebug="[0:disable|1:enable]"></debug>
<debug SipLogLevel="[0:Disabled|1|2|3|4|5|6|7:verbose]"></debug>
Debug DSP <debug DspDebug="[0:disabled|1:enabled]"></debug>
<debug LegacyInteropMode="[0:disable|1:enable]"></debug>
<debug MirrorDisplay="[0:disable|1:enable]"></debug>
Statically configured address
overrides any value from DHCP
httpport not required. port
number default is 80. A value will
only be provided if explicitly set
in the port part of the HTTP URL.
Conversely having no port set
here means the default port (80)
is used.
N.B. UC360, will check on
reboot as well.
upgrade auto will not prompt
user
Verbose(2), debug(3), info(4),
warn(5), error(6)