Programming/Configuration Steps - Mitel UC360 Administration Manual

Programming/Configuration Steps

STEP 1: DHCP Server Settings
HTTP Configuration Server URI
Add the string:
id:ipphone.mitel.com;cfg_uri=[http[s]://][hostname|IP][:port_number]/path/to/config/directory
in option 125/43 (MiVoice Business provides an option to configure vendor-specific info in option
43, but not in option 125.)
Alternatively, DHCP option 66 can also be used to provide the URI. Note that either HTTP or
HTTPS may be used for the cfg_uri value, but only HTTP for the sw_uri.
Order of precedence of options:
• Static overrides DHCP
• Option 125 cfg_uri
• Option 43 cfg_uri
• Option 66
• Option 125 sw_uri
• Option 43 sw_uri
HTTP S/W Upgrade Server URI
Add the string:
id:ipphone.mitel.com;sw_uri=[http://][hostname|IP][:port_number]/path/to/firmware/directory
in option 125/43. Alternatively DHCP option 66 can also be used to provide the URI. Note HTTP
only; HTTPS is not supported.
Order of precedence of options:
• Static overrides DHCP
• Option 125 sw_uri
• Option 43 sw_uri
• Option 66
Note: One of either option 125 or 43 must be used not both. Option 125 takes precedence over
43 and if present any contents of option 43 are ignored. Note also that sw_uri can be used to
configure both the configuration URI and the S/W upgrade URI.
MASS DEPLOYMENT
101