Display - Mitel UC360 Administration Manual

UC360 Administration Guide

Display

To access the Display settings:
1. Press Settings, then press Advanced.
2. Press Display.
You can configure the Brightness and Screen timeout.
To adjust the Brightness of the UC360 Display
1. Press Brightness.
2. Moving the slider to the left or right.
3. Click OK.
To configure Screen Timeout
1. Press Screen timeout.
2. Select the Screen Saver timeout interval.
You can choose one of the following mutually exclusive radio button options: 15 seconds,
30 seconds, 1 minute, 2 minutes, 10 minutes and 30 minutes. The default timeout is 2
minutes.
The screen will timeout if the phone is continuously idle for the time-out period that was
configured. This means that none of the following events occur: touch, key press, incoming
call, on a call, or share presentation. The administrator will be logged off.
When the timeout occurs, the screen will go dim and the blue LEDs on the conference unit will
flash in a clockwise rotating pattern. Each LED is on for two seconds until there is a user activity
or an incoming call is received. The followings actions would be considered as a user activity:
• Press Home
• Click or move the USB mouse.
• Press any keys on the USB keyboard.
52
.