Ldap Translation Plan Rules; Dial Plan Settings; Video Quality Settings; Timezone Values - Mitel UC360 Administration Manual

LDAP Translation Plan Rules

The first 5 ldap_translation Rules are processed; any more entries will generate warning logs
and be otherwise ignored. Note that a Rule must always be accompanied by its corresponding
Prefix. The Prefix may be empty but it must always be there, otherwise warning logs will be
issued that the entry is invalid.

Dial Plan Settings

The first 5 dialpl DigitDials are processed; any more entries will generate warning logs and be
otherwise ignored.

Video Quality Settings

Video_quality settings that can be set from XML represent a subset of the values configurable
from the Advanced Settings. Specifically settings available from Debug Settings -> Custom
Video Settings are not included. Instead the full set of uplink+downlink bit rate, resolution and
frame rate are set from the subset as they are for Advanced Settings -> Video Settings. Note
that when CableDSL is enabled the link is considered asymmetric and uplink and downlink
settings are applied independently from the values for Uplink and Link respectively. Conversely
when disabled the uplink values are overridden by the downlink values to achieve a symmetric
bandwidth configuration, so in this case the Uplink value is irrelevant.

Timezone Values

The timezone value must be one of the following timezone ids. The tag values are what is
displayed in the Advanced Settings -> Date & time settings -> Select time zone list for the
default locale.
<timezones>
<timezone id="Pacific/Majuro">Marshall Islands</timezone>
<timezone id="Pacific/Midway">Midway Island</timezone>
<timezone id="Pacific/Honolulu">Hawaii</timezone>
<timezone id="America/Anchorage">Alaska</timezone>
<timezone id="America/Los_Angeles">Pacific Time</timezone>
<timezone id="America/Tijuana">Tijuana</timezone>
<timezone id="America/Phoenix">Arizona</timezone>
<timezone id="America/Chihuahua">Chihuahua</timezone>
XML File Format
109