Mitel UC360 Administration Manual page 54

UC360 Administration Guide
Configuring the Panasonic WV-SP105 - Image Setup
1. Click Image and set the following parameter:
Scroll down the screen until you see the items that need to be configured.
- Aspect ratio: 16:9
- H.264(1): Transmission priority: Constant bit rate
- Image quality: Low (motion priority)
2. Click Set.
The camera is ready to use. See "Camera Settings" on page 33 to configure the UC360 camera
settings.
Light Control Mode 50 Hz 60 Hz Compensation
When flicker is caused by fluorescent lighting, a setting allows the camera to automatically
compensate for the flicker. Select 50 Hz or 60 Hz corresponding to the location where the
camera is in use.
If necessary, to accommodate fluorescent lights:
1. Click the Image -> Image/Privacy tab.
2. Under Light Control Mode, select the required settings.
38