Mitel UC360 Administration Manual page 39

LDAP Translations Plan
The translation plan appends dialing prefixes to phone numbers that are contained in the
LDAP/AD directory so that they can be directly dialed on the connected phone system.
1. Press LDAP/AD Settings.
2. Press LDAP Translations Plan.
3. Enter the rules for the LDAP Translations Plan.
The translation plan supports up to 5 different dialing prefixes for phone numbers listed in the
Contacts (LDAP/AD) directory.
Each prefix has one or more rules when matched causes the prefix digits to be dialed before
the phone number in the Contacts directory.
If there aren't any matches to the rules, no prefix digits are dialed.
Writing rules
• To match a specific digit or * or # enter it directly.
• To match any digit or * or # enter an X or x.
• To add additional rules for the same prefix separate with a semicolon. For example, 10 digit
numbers starting with area codes 613 and 343 match with the rule
613XXXXXXX;343XXXXXXX
Some examples are shown below.
• 4 digit extension dialing with a 7 prefix
• 613 area code number of 10 digits dialing with a 9 prefix
• long distance dialing with 10 digit dialing with a 91 prefix
• long distance 1+10 digits dialing with a 9 prefix
• three digit extensions starting with 1XX, 2XX, 3XX dialing with a 70 prefix
UC360 Configuration
23