Mitel UC360 Administration Manual page 99

ONVIF DEVICE MANAGER
5. Next, run the Microsoft .NET 4 installer that you downloaded.
6. Read the license terms, then select the checkbox.
7. Click Install. The installation will then proceed.
8. When the installation is completed, click Finish.
Installing the ONVIF Device Manager
1. Click on the ONVIF Device Manager Set up .exe.
2. Click Next
3. Specify the location installation on the next screen. The default is acceptable. Click Next.
4. Click Install.
5. When the installation is completed, click Finish.
83