Video Settings - Mitel UC360 Administration Manual

UC360 Configuration

Video Settings

Video Settings allow you to adjust video bandwidth parameters for both the uplink and downlink
LAN connections. The video settings menu also allows you to enable or disable the Dynamic
Bandwidth Allocation (DBA) capability introduced in Release 2.0.
DBA is an algorithm the UC360 uses to reduce packet loss on a congested communication
link. DBA will lower the UC360's transmitted bit rate according to the packet loss feedback it
receives from the remote end, the end goal being that a reduction in the transmission rate
should alleviate congestion and packet loss.
DBA relies on the RTCP protocol. At the time of writing, the MiVoice Border Gateway does not
support the RTCP protocol. As a result, if the UC360 is connected to an MiVoice Border
Gateway, you should disable the DBA feature on the UC360.
1. Press Settings .
2. Press Advanced.
3. Press System Settings.
4. Select Video Settings.
5. Select the bandwidth for the video quality: High, Medium, or Low.
6. Enable Dynamic Bandwidth Allocation, if desired.
7. Click Save.
See the UC360 Engineering Guidelines for details on Dynamic Bandwidth Allocation.
27