Connect Your Phone To A Wireless Network With Wps - Cisco 6800 Series User Manual

Connect Your Phone to a Wireless Network with WPS

Procedure
Step 1
Press Applications
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi profile.
Step 3
In the Wi-Fi profile screen, do any of the actions to connect to Wi-Fi.
• Select any of the configured Wi-Fi profile and click Connect.
• Press Scan and select one wireless in the Connect to Wi-Fi screen. In the Setup Wi-Fi screen, enter
See the Profile Parameter table in the
Connect Your Phone to a Wireless Network with WPS
Wi-Fi Protected Setup (WPS) provides an easier way to connect your phone to a wireless network. With WPS,
you don't need to enter detailed settings for the access point to connect as you do with the connection through
Wi-Fi profile. You can either use the WPS button on your access point or the PIN code to connect to the
network through WPS.
The WPS option is available only in the menu on the phone screen. On the phone web page, you can only
configure your phone to connect to a wireless network using Wi-Fi profile.
Before you begin
Enable WPS on your access point.
Procedure
Step 1 Press Applications
Step 2
Select Network configuration > Wi-Fi configuration > Wi-Fi type.
Step 3 Press the navigation key to switch the Wi-Fi type to WPS.
Step 4
Press Set.
Push-button configuration and PIN configuration display under Wi-Fi type. Follow either one of the
following steps to connect to the network.
Step 5 Connect to the network using the WPS button on your access point.
a) Select Push-button configuration.
b) Press the WPS button on your access point.
The button name may vary on your access point.
c) Press Continue on your phone.
Step 6 Connect to the network using a PIN code.
a) Select PIN configuration.
An 8-digit PIN code displays on your phone screen.
b) Go to the web page of your access point and enter the PIN code.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
108
.
values in the fields and press Connect.
.
Set Up a Wi-Fi Profile from the Phone, on page 110
Settings
for the field values.