Phone Hardware And Buttons; Cisco Ip Phone 6821 Multiplatform Phones Buttons And Hardware - Cisco 6800 Series User Manual

Phone Hardware and Buttons

• Use the comma to separate the parts of the dial string.
• An authorization code must always precede a billing code in the speed-dial string.
• A single comma is required between the authorization code and the billing code in the string.
• A speed-dial label is required for speed dials with authorization codes and additional digits.
Before you configure the speed dial, try to dial the digits manually at least once to ensure that the digit sequence
is correct.
Your phone does not save the authorization code, billing code, or extra digits from the speed dial in the call
history. If you press Redial after you connect to a speed-dial destination, the phone prompts you to enter any
required authorization code, billing code, or additional digits manually.
Example
To set up a speed-dial number to call a person at a specific extension, and if you need an authorization code
and billing code, consider the following requirements:
• You need to dial 9 for an outside line.
• You want to call 5556543.
• You need to input the authorization code 1234.
• You need to input the billing code 9876.
• You must wait for 4 seconds.
• After the call connects, you must dial the extension 56789#.
In this scenario, the speed-dial number is 95556543,1234,9876,,56789#.

Phone Hardware and Buttons

Cisco IP Phone 6821 Multiplatform Phones Buttons and Hardware

The following figure shows the Cisco IP Phone 6821 Multiplatform Phones.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
20
Your Phone