Cisco Headset 531 And 532 - Cisco 6800 Series User Manual

Cisco Headset 531 and 532

Number
3
Cisco Headset 531 and 532
The Cisco Headset 530 Series are two headsets that are developed for Cisco products and services. The 531
headset features a single earpiece, and offers lightweight comfort. The 532 headset features two earpieces for
use in a noisy environment or busy office.
The Cisco Headset 531 and 532 use one of two connectors with the Cisco IP Phone 6871 Multiplatform
Phones:
• RJ9 connector–Use it with Cisco IP Phones that have a headset port.
• USB headset adapter– Provides enhanced call control.
The Cisco Headset USB Adapter is available for use with the Cisco Headset 531 and 532. With the adapter,
you can test your headset, and customize your bass and treble, gain or microphone volume, and sidetone or
feedback settings. The adapter also retains your settings if you switch between phones.
The Cisco USB adapter is supported onCisco IP Phone 6871 Multiplatform Phones. To check your phone
model, press Applications
model.
The Cisco Headset 530 Series require Multiplatform Firmware Release 11.1(2) or a later version. Upgrade
your phones to the latest firmware before using these headsets.
Cisco Headset 531 and 532 LED and Buttons
The Cisco Headset USB Adapter for Cisco Headset 530 Series is used for the basic call features.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
126
Name Description
Use to manage calls:
Call button
• Press once to answer an incoming call.
• Press and hold for 2 seconds to end a call.
• Press twice to reject an incoming call.
• Press once to put an active call on hold. Press again to
retrieve a call from hold.
> Status > Product information. The Product name field shows your phone
Accessories