Onboard Your Phone With Activation Code; Set A Password On Initial Phone Boot Up; User Authentication Control - Cisco 6800 Series User Manual

Onboard Your Phone with Activation Code

Step 2
Press Continue.
The phone completes the provisioning process automatically.
Step 3 If an error message displays, enter the code again or contact your administrator.
Onboard Your Phone with Activation Code
After your phone boots up, you will see a welcome screen where you can enter the activation code. If you
don't have an activation code, contact your administrator.
Note
The Cisco IP Phone 6861 Multiplatform Phones don't support onboarding with activation code.
Before you begin
Your administrator provides you with a 16-digit activation code in the form xxxx-xxxx-xxxx-xxxx.
Procedure
Step 1 Enter your activation code in the field that is provided on the Welcome screen. You don't need to input the
hyphen (-) character when entering the code.
Step 2 Press Continue.
The phone completes the onboarding process automatically.
Step 3
If an error message displays, enter the code again or contact your administrator for a new code.

Set a Password on Initial Phone Boot Up

The first time your phone boots up, you may be prompted to set a password. If you are not prompted, your
administrator has created a password for you.
Procedure
Step 1 Enter your password in the New password and Reenter new password fields.
Step 2
Press Save.

User Authentication Control

Your administrator can configure if you require authentication to access phone menus. Your administrator
can also customize and turn off the authentication to allow access to all phone menus.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
12
Your Phone