Cisco 6800 Series User Manual page 49

Your Phone
Item
2
3
4
5
6
Cisco IP Phone 6841, 6851, and 6861 Vision-Impaired and Blind Accessibility Features
Accessibility Feature
Line and feature buttons
The line and feature buttons are on the left and
right sides of the screen.
Back-lit grayscale LCD screen with adjustable
contrast
Softkeys
• These are large buttons just below the LCD.
Navigation Cluster (includes the Navigation ring
and the Select button)
The Navigation cluster is located in the center of
the phone.
Hold button, Transfer button, and Conference
button
• These three large buttons are located to the
right of Navigation cluster.
• In this group of buttons, the Hold button is
the single button in the top row. Below the
Hold button, the Transfer button is on the
left, and the Conference button is on the
right.
Description
Use line buttons to start, answer, or switch
to a call on a particular line.
Features, such as speed dial, line status,
privacy, do not disturb (DND), and service
URLs, can be assigned to feature buttons.
Your administrator sets up programmable
feature buttons on your phone.
Colors indicate your phone's status:
•
•
•
•
Allows you to adjust your phone screen's
contrast.
Provide access to special functions. The
functions are displayed on the LCD.
Use the Navigation ring to move up and
down in the phone LCD. The Select button
is in the center of the Navigation cluster.
Allow you to use these functions on your
phone.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
Green—Line is idle.
Red, steady—Line is active or in
use.
Red, flashing—Line is on hold
or there is an inbound call.
Amber, steady—Line is
unregistered (cannot be used).
37