Related Information
"System Components" on page 25
■
"Field-Replaceable Units" on page 27
■
"Remove the Motherboard Assembly" on page 168
■
Reset the BIOS Password and Clear the CMOS NVRAM
You can clear the CMOS NVRAM and BIOS Password by pressing the CLR CMOS button,
which is located on the motherboard. You can also reset the BIOS passwords from the BIOS
Setup utility.
Ensure that all power is removed from the server before removing or installing
Caution -
the motherboard assembly. You must disconnect the power cables from the system before
performing these procedures.
Prepare the server for service.
1.
See
"Preparing the Server for Component Replacement" on page
2.
Remove the PCI mezzanine.
See
"Remove the PCI Mezzanine" on page
Reset the BIOS Password and Clear the CMOS NVRAM
75.
102.
Replacing Motherboard Assembly Components
177