Table of Contents
Advertisement
Refer to the ILOM 3.0 documentation for instructions.
At the ILOM prompt, shut down the operating system:
5.
-> stop /SYS
SC Alert: SC Request to Power Off Host.
If the system is running the Solaris OS, refer to the Solaris system administration
documentation for additional information.
Shut down the chassis power:
6.
-> stop /SP
SP Alert: SP Request to Power Off Chassis.
Refer to the ILOM 3.0 documentation for more information about the stop command.
You can also use the Power button on the front of the server to initiate a graceful system
Note -
shutdown. This button is recessed to prevent accidental server power off. Use the tip of a pen to
operate this button.
7.
Disconnect the power and cables from the server.
See
"Disconnect Cables From the Server" on page
Related Information
"Power Down Server Gracefully Using the Power Button" on page 77
■
"Power Down Server For an Emergency" on page 79
■
"Disconnect Cables From the Server" on page 80
■
"Power On the Server" on page 214
■
Power Down Server Gracefully Using the Power Button
You can use the Power button on the front of the server to initiate a graceful system shut
Note -
down. This button is recessed to prevent accidental server power off.
Use a pen or other pointed object to press and release the power button on the
1.
front panel.
Power Down Server Gracefully Using the Power Button
80.
Preparing for Service
77
Advertisement
Table of Contents
