Remove the SAS Controller HBA
7.
Return the server to operation.
See
"Returning Server to Operation" on page
8.
Connect any external cable to the PCIe2 card.
Refer to your PCIe2 card documentation for more information.
Related Information
"PCIe2 Slot Characteristics" on page 112
■
"PCI Mezzanine Auxiliary Power Connector" on page 114
■
"Remove PCIe2 Cards From Slots 4 and 5" on page 115
■
Replacing the SAS Controller HBA
These topics describe how to remove and install the SAS controller HBA. Refer to the SAS
controller HBA documentation for complete cabling and software information.
"Remove the SAS Controller HBA" on page 118
■
"Install the SAS Controller HBA" on page 120
■
Related Information
"Replacing PCIe2 Cards in Slots 4 and 5" on page 115
■
"Replacing Lower PCIe2 Cards" on page 123
■
Remove the SAS Controller HBA
1.
Prepare the server for service.
See
"Preparing the Server for Component Replacement" on page
Locate the SAS controller HBA on the PCI mezzanine.
2.
The HBA is installed in the right-most slot on the PCI mezzanine.
118
Sun Netra X4270 Server • September 2015
211.
75.