Table of Contents
Advertisement
2.
Lower the PCI mezzanine and slide it toward the front of server, ensuring that it
is fully seated on the PCI risers.
3.
Using a No. 2 Phillips screwdriver, tighten the four PCI mezzanine screws.
4.
Reconnect the following PCI mezzanine cables.
LED board cable
■
Fan tray 1 power cable
■
Power cable from PDB
■
Internal SAS HBA cable
■
Fan tray 2 power cable
■
Replacing Motherboard Assembly Components
Install the PCI Mezzanine
105
Advertisement
Table of Contents
