Table of Contents
Advertisement
Configure TPM Support
The updated Trusted Computing screen appears and shows that the Execute TPM Command
setting has changed to Enabled.
8.
Press the F10 key to save the changes and exit the BIOS Setup utility.
9.
To verify that TPM support is configured, do the following:
Reboot the server.
a.
b.
Access the BIOS Setup utility menus.
For instructions, see
c.
Select Advanced -> Trusted Computing.
56
Sun Netra X4270 Server • September 2015
"Access the BIOS Setup Utility Menus" on page
46.
Advertisement
Table of Contents
