Table of Contents
Advertisement
Remove the LED Board
Caution -
LED board out of the chassis.
5.
Carefully lift the LED board and cable from the cable clips on the chassis wall.
You may need to disconnect the LED board cable from the PCI mezzanine.
6.
Disconnect the cable from the LED board.
7.
Set the LED board aside on an antistatic mat.
8.
Continue to
200
Sun Netra X4270 Server • September 2015
Do not tug on the LED board cable. Hold the green thumbscrew when swinging the
"Install the LED Board" on page
201.
Advertisement
Table of Contents
