Table of Contents
Advertisement
Install the Lower PCIe2 Cards
Save the filler panel in case you must remove the PCIe2 card for service.
Slide the PCIe2 card into the PCIe2 riser assembly connector until fully seated.
6.
7.
Install the card securing screw on the right side of the PCIe2 card faceplate.
Seat the PCIe2 riser assembly into the motherboard.
8.
Note -
PCIe2 risers 1 and 2. Do not attempt to install a PCIe2 riser in a different location on the
motherboard.
9.
Tighten the appropriate PCIe2 riser assembly securing screws.
10.
Install the PCI mezzanine.
126
Sun Netra X4270 Server • September 2015
The motherboard connector for PCIe2 riser 0 is different than the connector used by
Advertisement
Table of Contents
