VIFB8 – 02
Opening and closing the RIO node
Red
LED
Plug for
RIO cable
Fig. 4/12: Cover of the RIO node
9706
4. Installation
CAUTION
Before the RIO node is opened, the operating
voltage of the following must be switched off:
•
electronic components and or inputs
•
outputs
The following connection and display elements
are situated on the cover of the RIO node:
POWER
BUS
BUS
•
Opening
Unscrew the 4 Philips screws in the cover
and remove the cover.
•
Closing
Replace the cover on the RIO node and
tighten the Philips screws in diagonally oppo-
site sequence.
Green LED
Philips
screw
4-23