Allen-Bradley - Festo VIFB-02 Series Manual

VIFB8 – 02
5-4
5. Commissioning

Allen-Bradley

If the valve terminal/valve sensor terminal is
used on the Allen-Bradley RIO link the following
must be observed:
•
Configuration
The valve terminal/valve sensor terminal re-
acts on the Allen-Bradley RIO link like a re-
mote I/O block from Allen-Bradley. This corre-
sponds to a quarter rack in A-B terminology
with a maximum of 32 inputs and 32 outputs.
A special configuration software is not
necessary.
•
The valve terminal evaluates only the output
information.
•
The valve sensor terminal evaluates both out-
put and input information.
Some versions of A-B programmable controllers
require the RIO devices to be added on to a
"scan list".
Please consult A-B literature.
9706