VIFB11 - 02
Opening and closing the field bus node
Green LED
Green LED
Plug for field
bus cable
Bild 4/14: Cover of the field bus terminal
4-24
4. Installation
WARNING
Before the field bus node is opened, the oper-
ating voltage of the following must be switched
off:
•
electronic components and/or inputs
•
outputs
The following connection and display elements
are to be found on the cover of the field bus
node:
P O W E R
M O D /N ET
S TA TU S
B US
E R RO R
P O W E R
BUS
•
Opening
Unscrew the 4 Philips screws in the cover
and remove the cover.
•
Closing
Replace the cover on the field bus node
and tighten the Philips screws in diagonally
opposite sequence.
Green LED
Red LED
Philips screw
0503f