Festo VIFB-02 Series Manual page 61

VIFB8 – 02
4-26
4. Installation
Possible RIO addresses:
PLEASE NOTE
Do not use the following chart to set the ad-
dress switches.
Please go to chapter 5. Commissioning and
refer to the tables, "Addressing facilites" for
setting the switches.
A-B programmable
controller family
PLC-2
PLC-3
PLC-5/250
PLC-5/15
PLC-5/25
PLC-5/30
PLC-5/40
PLC-5/60
SLC-5/02 with 1747–SN
Fig. 4/15: RIO addresses
The following procedure should be adopted:
1. Switch off the operating voltage.
2. Assign a non reserved RIO address to the
valve terminal/valve sensor terminal.
3. With a screwdriver set the arrow of the appro-
priate address selector switch to the tens
and/or units figure of the desired RIO ad-
dress.
I/O rack no.
2; ...; 7
1; ...; 30
1; ...; 17
01; ...; 03
01; ...; 07
01; 02; ...; 07
01; ...; 17
01; ...; 27
0; ...; 3
9706