Con-Contrast; Csp-Color Space - Christie DWU1612-HS Technical Reference

Examples
Set the top-left vertical adjustment value to 20:
(CNR+TLCY 20)
CON–Contrast
Sets the image contrast by adjusting the gain applied to the input signal.
This command adjusts the degree of difference between the lightest and darkest parts of the image
and changes the amount of black and white in the image.
Commands
Command Description
CON <value> Sets the degree of difference between the lightest and darkest
parts of the image and changes the amount of black and white in
the image.
Examples
Set the contrast value to 50:
(CON 50)
CSP–Color Space
Specifies which color space the input signal uses.
This command is only useful for analog signals and certain digital sources.
Commands
Command Description
CSP <value> Selects the color space for the input signal.
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 to 100
50 (Default)
Values
0 = Auto
For RGB:
1 = RGB Full (Default)
2 = RGB Limited
For YUV:
3 = REC709 (Default)
4 = REC601
21