Table of Contents
Advertisement
Command
Description
EBL+GAMA
Sets the gamma value for blending.
EBL+LFTE <0 | 1>
Enables or disables edge blending of the left
edge.
EBL+LFTS <value>
Sets the starting point of the left edge
blend.
EBL+LFTW <value>
Sets the height of the left edge blend.
EBL+RHTE <0 | 1>
Enables or disables edge blending of the
right edge.
EBL+RHTS <value>
Sets the starting point of the right edge
blend.
EBL+RHTW <value>
Sets the height of the right edge blend.
EBL+TOPE <0 | 1>
Enables or disables edge blending of the top
edge.
EBL+TOPS <value>
Sets the starting point of the top edge
blend.
EBL+TOPW <value>
Sets the height of the top edge blend.
Examples
Turn on the bottom edge blending:
(EBL+BTME 1)
Set the left edge blending starting point to 150 pixels:
(EBL+LFTS 150)
Set the top blend height to 200 pixels:
(EBL+TOPW 200)
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
4 (Default)
0 = 1.8
1 = 1.9
2 = 2.0
3 = 2.1
4 = 2.2 (Default)
5 = 2.3
6 = 2.4
0 = Disables edge blending of the left edge
(Default)
1 = Enables edge blending of the left edge
0 to 200 pixels
0 (Default)
4 to 800 pixels
4 (Default)
0 = Disables edge blending of the right edge
(Default)
1 = Enables edge blending of the right edge
0 to 200 pixels
0 (Default)
4 to 800 pixels
4 (Default)
0 = Disables edge blending of the top edge
(Default)
1 = Enables edge blending of the top edge
0 to 200 pixels
0 (Default)
4 to 500 pixels
4 (Default)
27
Advertisement
Table of Contents
