Page 1
Ins t allat ion an d Set up M a n u al 020-102550-01 Optional Lenses Q Series...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
• TIP HAZARD! Do not install a lens without securely mounting the projector first. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
• Remove the lens cap before turning the product on to avoid damaging the lens. • Only use cleaning solutions recommended by Christie. All other cleaning solutions may cause product damage and will void the warranty. • Do not reuse lens tissues.
Installing the zoom lenses for Q Series Learn how to install and remove the zoom lenses for the Q Series projectors. Installing the zoom lens Only use lenses designed for the projector model. 1. Pull out the dust protector to remove it.
Page 7
To prevent the lens from falling off, after attaching the lens, check that it is securely mounted and that the lens does not move. 4. Re-install the upper and lower front covers. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Slide the lower part of the front cover downward while pressing the front cover from the upperside and remove from the projector. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
2. To focus adjustment of the image at the surrounding area of the screen, rotate the focus adjustment ring as shown below. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
Installing the ultra short throw fixed lens Learn how to install and remove the ultra short throw fixed lens for the Q Series projectors. Installing the ultra short throw fixed lens Only use lenses designed for the projector model. 1. Pull out the dust protector to remove it.
Page 12
Projection window b) Support the lens and move the lens lock lever upward until the lever clicks into the locked position. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
1. Move the lens to the center position: a) Press LENS SHIFT. b) To access the CENTERING feature, from the LENS SHIFT dialog, press INPUT. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
Page 14
Remove the lens from the projector. To avoid any malfunctions, ensure the surface of the lens does not come in contact with the projector. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
• To protect itself, the projector has a temperature sensor that turns off the power if its internal temperature rises abnormally. Christie recommends the following to prevent the temperature rising abnormally: •...
Learn how to mount the projector with an ultra short throw fixed lens on a ceiling. 1. To mount the bracket of the ceiling mount to the projector and the mount bracket A, use the four M6×35 hex-head screws. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Page 20
4. When the screen is in position, firmly tighten the screw until it is locked in place. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Page 24
Adjust the position within the range which does not cause the missing of the image. For details, consult with your dealer. Optional Lenses Q Series Installation and Setup Manual 020-102550-01 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Page 25
Corporate offi ces Worldwide offi ces USA – Cypress Australia Eastern Europe and India Singapore ph: 714-236-8610 ph: +61 (0) 7 3624 4888 Russian Federation ph: +91 (080) 6708 9999 ph: +65 6877-8737 ph: +36 (0) 1 47 48 100 Canada –...