Ntw-Wireless Network - Christie DWU1612-HS Technical Reference

Turn network messages on:
(NET+SHOW 1)
Set the Ethernet address to 192.168.000.001:
(NET+ETH0 "192.168.000.001")
Reset to the default settings:
(NET+RSET 1)
Set the subnet mask to 255.255.255.000:
(NET+SUB0 "255.255.255.000")
NTW–Wireless Network
Modifies the wireless network settings.
Commands
Command Description
NTW+ENIP Modifies the end IP address for the wireless
"<value>" network.
NTW+ETH0 Modifies the IP address for the wireless network.
"<value>"
NTW+GATE Modifies gateway settings.
"<value>"
NTW+SETT Applies the WLAN settings.
NTW+SLCT <0 | 1> Turns wireless network on or off.
NTW+SSID Modifies the unique wireless network name.
"<value>"
NTW+SUB0 Modifies subnet mask settings.
"<value>"
Examples
Set the IP address to 192.168.000.001:
(NET+ETH0 "192.168.000.001")
Set the MAC address to 00:E0:47:01:02:3C:
(NET+MAC0 "00:E0:47:01:02:3C")
Turn the wireless LAN on:
(NTW+SLCT 1)
Set the subnet mask to 255.255.255.000:
(NET+SUB0 "255.255.255.000")
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
value = Numeric value
value = Numeric value
value = Numeric value
—
0 = Turns the wireless network off
1 = Turns the wireless network on
value = Numeric value
value = Numeric value
50