Bld-Apply Blend Settings; Bls-Save Blend Settings - Christie DWU1612-HS Technical Reference

Command Description
Examples
Select a gamma correction curve for film input:
(BGC 1)
Select a gamma correction curve for bright content:
(BGS 2)
BLD–Apply Blend Settings
Applies previously saved blend settings to the projector.
Commands
Command Description
BLD? Returns the blend setting that is applied to the
projector.
BLD <value> Applies previously saved blend setting to the
projector.
Examples
Disable blending:
(BLD 0)
Use saved blend setting #3:
(BLD 3)
BLS–Save Blend Settings
Saves the geometry correction after doing blending.
Commands
Command Description
BLS <value> Saves the geometry correction after doing
blending.
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
4 = DICOM
Values
—
0 (Default)
1 to 4 = Selects saved blend settings
Values
1 to 4 = Saves geometry correction to one
of four blend settings
1 (Default)
14