Christie DWU1612-HS Technical Reference page 18

Command Description
CCA+REDG <value> Specifies the red levels of gain.
CCA+REDH <value> Specifies the red levels of hue.
CCA+REDS <value> Specifies the red levels of saturation.
CCA+RRTD Resets the red color settings to their
defaults.
CCA+WALL <0 | 1 | Sets the wall color so the projector can
2> enhance the color performance customized
for the specific wall.
CCA+WHBG <value> Specifies the blue levels of white gain.
CCA+WHGG <value> Specifies the green levels of white gain.
CCA+WHRG <value> Specifies the red levels of white gain.
CCA+WRTD Resets the white gains settings to their
defaults.
CCA+YELG <value> Specifies the yellow levels of gain.
CCA+YELH <value> Specifies the yellow levels of hue.
CCA+YELS <value> Specifies the yellow levels of saturation.
CCA+YRTD 1 Resets the yellow color settings to their
defaults.
Examples
Set the red level of hue to 120:
(CCA+REDH 120)
Turn on automatic test patterns for HSG adjustments:
(CCA+MHTP 1)
Set the wall color to white:
(CCA+WALL 1)
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 to 254
127 (Default)
0 to 254
127 (Default)
0 to 254
127 (Default)
—
0 = White (Default)
1 = Gray 130
2 = Light yellow
0 to 254
127 (Default)
0 to 254
127 (Default)
0 to 254
127 (Default)
—
0 to 254
127 (Default)
0 to 254
127 (Default)
0 to 254
127 (Default)
1
18