Szp-Size Presets; Tde-3D Enable - Christie DWU1612-HS Technical Reference

SZP–Size Presets
Sets the image to one of several preset size/position presets.
For all 3D input timings, only the 3D Mode size preset is available.
Commands
Command Description
SZP <value> Sets the preset size
type.
Examples
Set the size preset to LetterBox:
(SZP 3)
TDE–3D Enable
Sets the decoding method for 3D timings with different kinds of packing formats.
Commands
Command Description
TDE <value> Sets the decoding method for 3D timings with different kinds
of packing formats.
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Values
0 = Auto—Displays an image with the detected size (Default)
1 = Native—Displays the image in its native resolution
2 = 4:3—Retains the 4:3 aspect ratio
3 = LetterBox—Displays the image with black borders on the top
and bottom
4 = Full Size—Fills the screen with the image (regardless of the
source)
5 = Full Width—Stretches the image to the full display width and
keeps the aspect ratio
6 = Full Height—Stretches the image to the full display height and
keeps the aspect ratio
7 = Custom—Displays the image with a custom size and position
for each source
8 = 3D Mode—Enabled for 3D input timings
Serial API commands
Values
0 = Auto (Default)
1 = Frame Packing
2 = Side by Side
3 = Top and Bottom
4 = Frame Sequential
5 = Off
67