Piv-Pin Protect; Ppp-Main Layout - Christie DWU1612-HS Technical Reference

PIV–PIN Protect
Activates password protection on the projector, where a personal identification number (PIN) must be
provided before an image can be displayed.
Commands
Command Description
PIV "XXXXX" Activates password protection on the
projector.
Examples
Set the PIN to 33445:
(PIV "33445")
PPP–Main Layout
Chooses a preset location for the picture-in-picture and picture-by-picture window.
Note the following:
• The Location settings adjust the position of the window.
• Blanking is not affected.
• While in split screen mode, several channel controls that resize image are disabled.
Commands
Command Description
PPP <value> Selects the picture-in-picture/
picture-by-picture image
location.
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Values
X = 0 to 9
Replace each X with a number from 0 to 9
Values
0 = Places the picture-by-picture image on the left
vertical center of the main image (Default)
1 = Places the picture-by-picture image on the top
center of the main image
2 = Places the picture-by-picture image on the right
vertical center of the main image
3 = Places the picture-by-picture image on the bottom
center of the main image
4 = Places the picture-in-picture image on the bottom
right of the main image
5 = Places the picture-in-picture image on the bottom
left of the main image
6 = Places the picture-in-picture image on the top left
of the main image
7 = Places the picture-in-picture image on the top right
of the main image
Serial API commands
54