Setting network environment
Determine the communication settings such as network setup, serial port information, and so on.
Adjusting LAN setting
Set up network configuration for wire networking.
1. Select Menu > Configuration > Communications > LAN.
2. Set up the appropriate setting:
•
Mac Address—Display the network MAC address value.
•
DHCP—Enable or disable the DHCP to automatically get IP address, subnet mask, and so
on.
•
IP Address—Assign the network IP address.
•
Subnet Mask—Assign the network subnet mask.
•
Default Gateway—Assign the network default gateway.
•
Primary DNS—Assign the primary DNS.
•
Secondary DNS—Assign the secondary DNS.
3. To apply the LAN settings, select Apply.
Adjusting WLAN setting
Set up network configuration for wireless networking.
1. Select Menu > Configuration > Communications > WLAN.
2. Set up the appropriate setting:
•
SSID—Display the SSID of the wireless network.
•
Enable—Enable or disable the wireless functionality.
•
Start IP—Assign the start IP address of the wireless network.
•
End IP—Assign the end IP address of the wireless network.
•
Subnet Mask—Assign the subnet mask of the wireless.
•
Default Gateway—Assign the gateway of the wireless.
3. To apply the WLAN settings, select Apply.
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
Configuring communications
54