Setting The Load Controller (Option); Selecting A Temperature Or Pressure Sensor - Siemens LMV51 Series Basic Documentation

8. Setting the load
controller (option)
Menu level 1 Menu level 2
Params & Display
LoadController
9. Selecting a
temperature or pressure
sensor
Menu level 1 Menu level 2
Params & Display
LoadController
Siemens Building Technologies
HVAC Products
Menu level 3
Configuration
Select a load controller operating mode in accordance with the examples given in chap-
ter «Operating modes with load controller».
This configures the output signal for the VSD
(section 6.3)
If the internal load controller of the LMV5... is used, a temperature or pressure sensor
must be connected to input 1, 2 or 4.
Menu level 3
Configuration
On the configuration level of the LC, select the required type of sensor.
Then, define the sensor's measuring range.
This configures speed acquisition (subsection 18.1.3)
Basic Documentation LMV5...
8 Commissioning instructions for the LMV5... system
Menu level 4 Menu level 5
LC_OptgMode
Menu level 4 Menu level 5
SensorSelection
MeasureRange
PtNi
Ext Input X61 U/I
MeasureRange
TempSensor
MeasureRange
PressSens
Ext Setpoint minExt
Setpoint max
Menu level 6
Menu level 6
153/301
CC1P7550en
13.08.2004