Table of Contents
Advertisement
4
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Lifter Motor (M101/M201/M301)
Removing the Horizontal Path Feed Motor (M004)
1) Remove the deck rear left
2) Remove the tension spring.
cover.
3) Remove the harness from the clamp and then remove the connector
(Refer to:4-18)
Removing the Lifter Motor (M101/M201/M301)
3) Remove the harness from eight clamps, and then remove two cable ties with lock.
MEMO:
The removal procedure
of the lifter motor from the
middle deck is described
below. The procedure of the
upper and lower decks is
the same.
1) Remove the deck rear left cover.
(Refer to:4-18)
2) Remove the deck rear right cover.
(Refer to:4-18)
4
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Lifter Motor (M101/M201/M301)
4) Remove three screws and then remove the horizontal path feed motor.
x3
F-4-83
F-4-83
39
F-4-84
F-4-84
F-4-85
F-4-85
39
Advertisement
Table of Contents
