Connecting To The Host Machine - Canon Paper Deck-AF1 Service Manual

5
Installation > Installation Procedure > Connecting to the Host Machine

Connecting to the Host Machine

Caution
Make sure that the host machine is not powered and the
power plug is not connected to the outlet.
2
2) Loosen the screw securing the rear latch plate, and then hook the latch plate on the latch sup-
port. Fully tighten the screws securing the front and rear latch plates.
5
Installation > Installation Procedure > Connecting to the Host Machine
1
1) Open the deck left front cover, loosen the screw securing the front latch plate, and then hook the latch
plate on the latch support.
3
3) Secure the shunt cable connected to the host machine to this equipment using a
screw (w/washer screw, white, M4×8).
F-5-55 F-5-55
F-5-54 F-5-54
x1
F-5-56 F-5-56
22
22