Table of Contents
Advertisement
5
Installation > Paper Deck Double Deeding Detection Kit-A1 Installation Procedure > Installing the Double Feeding Sensor Unit
5
5) Thread the double feeding sensor harness through the clamps, and then close the clamps.
7
7) Install the supplied two clamps on the side pate, and then open the lower two clamps.
5
Installation > Paper Deck Double Deeding Detection Kit-A1 Installation Procedure > Installing the Double Feeding Sensor Unit
6
6) Thread the 5-pin connector (reception side) of the double feeding sensor harness through the edge
saddle.
F-5-97
F-5-97
8
8) Thread the 4-pin connector (transmission side) of the double feeding sensor harness through four
clamps, and close the clamps.
F-5-99
F-5-99
39
F-5-98
F-5-98
F-5-100
F-5-100
39
Advertisement
Table of Contents
