Switching Between Paper Sizes - Canon Paper Deck-AF1 Service Manual

5
Installation > Installation Procedure > Switching between Paper Sizes

Switching between Paper Sizes

1
MEMO:
By following the procedure mentioned below, adjust the positions of the side and rear
guide plates to the paper size exactly. If not adjusted well, the paper may stagger in
the deck to cause printing position displacement.
1) Connect the power plugs of the host machine and this equipment to the wall outlets.
MEMO:
Make sure that the leakage breaker is turned on.
2) Turn on the main power of the host machine.
3
4) Raise the rear guide plate in the direction of the arrow. Move the front side guide plate in the direction of
the arrow while nipping its lever.
5 Installation > Installation Procedure > Switching between Paper Sizes
2
3) Press the deck open switch to open the upper deck.
4
5) Set the paper to be used by the user.
F-5-69 F-5-69
27
F-5-68 F-5-68
F-5-70 F-5-70
27