Canon Paper Deck-AF1 Service Manual page 112

5
Installation > Installation Procedure > Checking and Adjusting the Heights
MEMO:
If the height of the paper deck or host machine is not within specification, adjust it
using the following procedure.
5
5) Adjust six casters.
5 Installation > Installation Procedure > Checking and Adjusting the Heights
6
6) Using a wrench, loosen the upper nut on the caster.
F-5-43 F-5-43
4
4) By removing a screw, remove the wrench from the inside of the deck left front cover.
7
7) Using a wrench, turn the lower nut on the caster to adjust the height.
F-5-44 F-5-44
x1
F-5-42 F-5-42
Up Down
F-5-45 F-5-45
18
18