4
Parts Replacement and Cleaning Procedure > Motors > Removing the press motor (M105)
Removing the feed motor (M101)
1)Separate the finisher from the host machine.
2)Remove the cutter unit.
Removing the press motor (M105)
1)Separate the finisher from the host machine.
2)Remove the cutter unit.
4
Parts Replacement and Cleaning Procedure > Motors > Removing the press motor (M105)
3)Remove 1 connector, 2 screws, and remove the feed motor.
x2
x1
3)Remove 1 connector, 1 screw, and remove the press motor unit.
x1
x1
4-21
F-4-50
F-4-50
F-4-51
F-4-51
4-21