Chapter 3
3.3.2.3 Removing the Cooling
Fan
1) Remove the screw [1], and disconnect the
connector [2]; then, detach the cooling fan [3].
[2]
F-3-15
3.3.2.4 Removing the Feed
motor
1) Loosen the 2 screws [1], and move the feed motor
[2] down; then, tighten the 2 screws [1] you have
loosened.
[1]
F-3-16
When mounting it, loosen the screws [1] to put it
back to its initial position.
2) Disconnect the connector [1], and remove the 2
screws [2]; then, detach the feed roller [3].
3-6
0003-7156
[1]
[3]
0003-3083
[2]
[1]
[2]
[1]
F-3-17
When mounting it, be sure that that timing belt [1]
is properly attached to the pulley [2].
[1]
F-3-18
3.3.3 Delivery Reversal Motor
3.3.3.1 Removing the Rear
Cover
1) Open the feeder cover [1] and the original pickup
tray [2]; then, remove the 4 screws [3], and detach the
rear cover [4].
[3]
[2]
[2]
0003-7168