Parts Preparation - Canon Paper Deck-AF1 Service Manual

5
Installation > Air Heater Unit Installation Procedure > Parts Preparation

Parts Preparation

The air heater unit can be installed on the upper, middle, and lower decks.
Required numbers of individual parts vary depending on where the air heater unit is installed. Prepare necessary parts according to the following
[2]
[10]
[6]
[1]
[9]
[3] [4] [5]
[7]
[8]
5 Installation > Air Heater Unit Installation Procedure > Parts Preparation
[1] Air heater unit (FM4-1850)
[2] Air heater PCB (FG3-4279)
[3] Upper deck air heater harness (about 90 cm / FG3-4327)
[4] Middle deck air heater harness (about 60 cm / FG3-4328)
[5] Lower deck air heater harness (about 40 cm / FG3-4329)
[6] PCB support (VT2-0006-006)
[7] Clamp (large / WT2-5974) *5
[8] Clamp (small / WT2-5973) *5
[9] Screw (binding screw, M4 x 8 / 4A3-3529)
[10] Screw (w/washer screw, M3 x 6 / XB2-4300-605)
*1: Required numbers for each deck.
*2: Required parts for the installation of the air heater unit on the upper deck.
*3: Required parts for the installation of the air heater unit on the middle deck
*4: Required parts for the installation of the air heater unit on the lower deck
*5: Required numbers vary depending on where the air heater unit is installed.
Where to install the air heater unit
Only the upper deck, or both the upper deck
and another deck
Only the middle deck, or both the middle and
lower decks
Only the lower deck
F-5-120
46
1 piece *1
1 piece *1
1 piece *2
1 piece *3
1 piece *4
2 pieces *1
2 pieces *1
2 pieces *1
Clamp Clamp
(large / WT2-5974) (small / WT2-5973)
6 pieces 6 pieces
Unnecessary
6 pieces
Unnecessary Unnecessary
46