4
Parts Replacement and Cleaning Procedure > Removing the PCBs > Removing the DC Power Supply PCB (PCB2)
Removing the DC Power Supply PCB (PCB2)
1) Remove the deck rear right cover.
(Refer to:4-18)
4) Remove the power supply box.
4
Parts Replacement and Cleaning Procedure > Removing the PCBs > Removing the DC Power Supply PCB (PCB2)
2) Remove four screws and one connector.
F-4-111
3) Lift the power supply box to remove two connectors.
x4
F-4-109
5) Remove four screws and then remove the power supply cooling fan bracket from the power supply
box.
x4
46
F-4-110
F-4-112
46