Machine Relocation Work - Canon Paper Deck-AF1 Service Manual

5
Installation > Machine Relocation Work

Machine Relocation Work

When relocating this machine to another place, carry out the following work.
1) Turn off the host machine following the shutdown sequence, and then remove the power plug
(from the outlet).
2) Remove the interface cover, and then disconnect the interface cable.
3) Disconnect the shunt cable.
4) Loosen the screws securing the delivery guide, raise the delivery guide, and then tighten the
screws firmly.
5) Release the front and rear latches.
6) Raise the two stoppers fully until they lock.
5
Installation > Machine Relocation Work
7) Remove the roller support plate from the lower deck.
8) Remove the separation roller nip cam from each deck.
F-5-78 F-5-78
F-5-79 F-5-79
x2
x1
31
F-5-80 F-5-80
F-5-81 F-5-81
31