Canon Paper Deck-AF1 Service Manual page 142

5
Installation > Air Heater Unit Installation Procedure > Installing the Air Heater Unit
4
4) Fit the included air heater PCB on the PCB supports, and then secure it using the two included
screws (w/washer screw, M3 x 6).
x2
6
6) Install six small clamps and six large clamps on the side plate.
5 Installation > Air Heater Unit Installation Procedure > Installing the Air Heater Unit
F-5-124
F-5-126
5
5) Connect the air heater AC harness to the CN4 of the air heater PCB.
MEMO:
When installing the air heater unit on the middle deck, only six large clamps are required.
Six small clamps are not required. When installing the air heater unit on the lower deck,
both six large clamps and six small clamps are not required.
48
F-5-125
48