Checking And Adjusting The Heights - Canon Paper Deck-AF1 Service Manual

5
Installation > Installation Procedure > Checking and Adjusting the Heights

Checking and Adjusting the Heights

MEMO:
The paper deck height requires adjustment depending on the floor of the installation
place. Improper height adjustment can cause paper jams frequently.
Check and adjust the heights using the following procedure.
2
2) Check that the height difference at the rear of the host machine and this equipment is within
0±1.5mm.
5 Installation > Installation Procedure > Checking and Adjusting the Heights
1
1) Connect this equipment to the host machine in such a manner that the latch supports installed on the host
machine is aligned with the pins on this equipment.
3) Check that the difference of the heights of this equipment at the front and rear is 1.5 mm or less.
Rear side
Height difference of 0 -/+ 1.5 mm
F-5-40 F-5-40
3
17
F-5-39 F-5-39
Front and rear side of paper deck
Height difference of 1.5 mm or less
F-5-41 F-5-41
17